- List
- EU dual-use list – Annex I to Regulation (EU) 2021/821, updated annually
- Originating regime
- Thỏa ước Wassenaar
a. Not used;
b. "Technology" for metal-working manufacturing processes, as follows:
1. "Technology" for the design of tools, dies or fixtures specially designed for any of the following processes:
a. "Superplastic forming";
b. "Diffusion bonding"; or
c. 'Direct-acting hydraulic pressing';
Technical Note:
For the purposes of 2E003.b.1.c., 'direct-acting hydraulic pressing' is a deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece.
2. Not used;
N.B. For "technology" for metal-working manufacturing processes for gas turbine engines and components, see 9E003 and the Military Goods Controls.
c. "Technology" for the "development" or "production" of hydraulic stretch-forming machines and dies therefor, for the manufacture of airframe structures;
d. Not used;
e. "Technology" for the "development" of integration "software" for incorporation of expert systems for advanced decision support of shop floor operations into "numerical control" units;
f. "Technology" for the application of inorganic overlay coatings or inorganic surface modification coatings (specified in column 3 of the following table) to non-electronic substrates (specified in column 2 of the following table), by processes specified in column 1 of the following table and defined in the Technical Note.
Note:
The table and Technical Note appear after entry 2E301.
N.B. This table should be read to specify the "technology" for a particular Coating Process only when the Resultant Coating in column 3 is in a paragraph directly across from the relevant Substrate under column 2. For example, Chemical Vapour Deposition (CVD) coating process technical data are included for the application of silicides to carbon-carbon, ceramic and metal "matrix" "composites" substrates, but are not included for the application of silicides to 'cemented tungsten carbide' (16), 'silicon carbide' (18) substrates. In the second case, the resultant coating is not listed in the paragraph under column 3 directly across from the paragraph under column 2 listing 'cemented tungsten carbide' (16), 'silicon carbide' (18).
b. "Technology" for metal-working manufacturing processes, as follows:
1. "Technology" for the design of tools, dies or fixtures specially designed for any of the following processes:
a. "Superplastic forming";
b. "Diffusion bonding"; or
c. 'Direct-acting hydraulic pressing';
Technical Note:
For the purposes of 2E003.b.1.c., 'direct-acting hydraulic pressing' is a deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece.
2. Not used;
N.B. For "technology" for metal-working manufacturing processes for gas turbine engines and components, see 9E003 and the Military Goods Controls.
c. "Technology" for the "development" or "production" of hydraulic stretch-forming machines and dies therefor, for the manufacture of airframe structures;
d. Not used;
e. "Technology" for the "development" of integration "software" for incorporation of expert systems for advanced decision support of shop floor operations into "numerical control" units;
f. "Technology" for the application of inorganic overlay coatings or inorganic surface modification coatings (specified in column 3 of the following table) to non-electronic substrates (specified in column 2 of the following table), by processes specified in column 1 of the following table and defined in the Technical Note.
Note:
The table and Technical Note appear after entry 2E301.
N.B. This table should be read to specify the "technology" for a particular Coating Process only when the Resultant Coating in column 3 is in a paragraph directly across from the relevant Substrate under column 2. For example, Chemical Vapour Deposition (CVD) coating process technical data are included for the application of silicides to carbon-carbon, ceramic and metal "matrix" "composites" substrates, but are not included for the application of silicides to 'cemented tungsten carbide' (16), 'silicon carbide' (18) substrates. In the second case, the resultant coating is not listed in the paragraph under column 3 directly across from the paragraph under column 2 listing 'cemented tungsten carbide' (16), 'silicon carbide' (18).