- List
- MTCR – Equipment, Software and Technology Annex – Version of 14 March 2024
Entries in this group
- 6.A. Equipment, assemblies and components
- 6.A.1. Composite structures, laminates, and manufactures thereof, specially designed for use in the systems specified in 1.A., 19.A.1. or 19.A.2. or the subsystems…
- 6.A.2. Resaturated pyrolised (i.e. carbon-carbon) components having all of the following:
- 6.B. Test and production equipment
- 6.B.1. Equipment for the "production" of structural composites, fibres, prepregs or preforms, usable in the systems specified in 1.A., 19.A.1. or 19.A.2., as follows…
- 6.B.2. Nozzles specially designed for the processes referred to in 6.E.3.
- 6.B.3. Isostatic presses having all of the following characteristics:
- 6.B.4. Chemical vapour deposition furnaces designed or modified for the densification of carbon-carbon composites.
- 6.B.5. Equipment and process controls, other than those specified in 6.B.3. or 6.B.4., designed or modified for densification and pyrolysis of structural composite…
- 6.C. Materials
- 6.C.1. Resin impregnated fibre prepregs and metal coated fibre preforms, for the goods specified in 6.A.1., made either with organic matrix or metal matrix utilising…
- 6.C.2. Resaturated pyrolised (i.e. carbon-carbon) materials having all of the following:
- 6.C.3. Fine grain graphites with a bulk density of at least 1.72 g/cc measured at 15ºC and having a grain size of 100 x 10⁻⁶ m (100 µm) or less, usable for rocket…
- 6.C.4. Pyrolytic or fibrous reinforced graphites usable for rocket nozzles and re-entry vehicle nose tips usable in systems specified in 1.A. or 19.A.1.
- 6.C.5. Ceramic composite materials (dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in missile radomes usable in systems specified…
- 6.C.6. High-temperature ceramic materials as follows:
- 6.C.7. Materials for the fabrication of missile components in the systems specified in 1.A., 19.A.1. or 19.A.2, as follows:.
- 6.C.8. Maraging steels, usable in the systems specified in 1.A. or 19.A.1., having all of the following:
- 6.C.9. Titanium-stabilized duplex stainless steel (Ti-DSS) usable in the systems specified in 1.A. or 19.A.1. and having all of the following:
- 6.D. Software
- 6.D.1. "Software" specially designed or modified for the operation or maintenance of equipment specified in 6.B.1.
- 6.D.2. "Software" specially designed or modified for the equipment specified in 6.B.3., 6.B.4. or 6.B.5.
- 6.E. Technology
- 6.E.1. "Technology", in accordance with the General Technology Note, for the "development", "production" or "use" of equipment, materials or "software" specified in…
- 6.E.2. "Technical data" (including processing conditions) and procedures for the regulation of temperature, pressures or atmosphere in autoclaves or hydroclaves when…
- 6.E.3. "Technology" for the "production" of pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the…