- List
- Australia Group – Dual-Use Chemical Manufacturing Facilities and Equipment and Related Technology and Software – Version of 17 June 2026
- Corresponding EU entry
- 2B350
Incinerators or reactors designed to destroy CW agents, AG-controlled precursors or chemical munitions, having specially designed waste supply systems, special handling facilities, and an average combustion chamber temperature greater than 1000o C, in which all surfaces in the waste supply system that come into direct contact with the waste products are made from or lined with the following materials:
(a) nickel or alloys with more than 40% nickel by weight;
(b) alloys with more than 25% nickel and 20% chromium by weight; or (c) ceramics.
Technical note: For the listed materials in the above entries, the term ‘alloy’ when not accompanied by a specific elemental concentration is understood as identifying those alloys where the identified metal is present in a higher percentage by weight than any other element.
Note: Reactors in this entry refer to plasma-fired reactor.
(a) nickel or alloys with more than 40% nickel by weight;
(b) alloys with more than 25% nickel and 20% chromium by weight; or (c) ceramics.
Technical note: For the listed materials in the above entries, the term ‘alloy’ when not accompanied by a specific elemental concentration is understood as identifying those alloys where the identified metal is present in a higher percentage by weight than any other element.
Note: Reactors in this entry refer to plasma-fired reactor.